看词语>英语词典>squish翻译和用法

squish

英 [skwɪʃ]

美 [skwɪʃ]

v.  (被)压坏,挤坏; 发吧唧声; 发吱嘎声

过去分词:squished 过去式:squished 现在分词:squishing 第三人称单数:squishes 

BNC.48495 / COCA.19433

牛津词典

    verb

    • (被)压坏,挤坏
      if sth soft squishes or is squished , it is crushed out of shape when it is pressed
      1. 发吧唧声;发吱嘎声
        to make a soft wet sucking sound

        英英释义

        noun

        • the noise of soft mud being walked on

          verb

          • put (a liquid) into a container or another place by means of a squirting action
            1. walk through mud or mire
              1. We had to splosh across the wet meadow
              Synonym:squelchsplashsploshsloshslop

            双语例句

            • An investigation of squish air motion in compression ignition engines
              压燃式发动机中挤流运动的研究
            • As the small and medium sized high-speed direct injection diesel engine needs strong intake swirl, squish compression and combustion turbulence, its intake port generally made spiral or tangential shape.
              对于中小型高速直喷式柴油机,因其需要较强的进气涡流、压缩挤流和燃烧紊流,其进气道一般做成螺旋的或切向的形状。
            • Reversed squish is mainly concentrated at edge of combustion chamber bowl.
              反喷或逆挤流主要集中在燃烧室边缘上。
            • Experimental Research on a Squish Jet Combustion Chamber
              CA1102汽油机挤气射流燃烧室研究
            • You may have to squish it a little in one or more directions to break it loose.
              您可能口都得它在一个或多个方向的一点打破它松散。
            • The squish patterns in engine piston bowls with different geometry are visualized by the method of oil streak in a motored single cylinder test engine.
              本文在一个拖动的单缸实验机上,利用油点条痕法显示了活塞上燃烧室凹坑中挤流运动的流谱,研究了燃烧室形状和几何尺寸对挤流谱的影响。
            • The effect of squish swirl on conduct channel of piston crown for automotive diesel engine
              车用柴油机活塞顶导向槽的挤压涡流效应
            • Squish the ellipse to about half the size.
              挤椭圆约一半大小。
            • By comparison, straight wall chamber ( type A) is easy to be manufactured, has the lowest thermal stress and has obvious squish. Type A is the best combustion room choice.
              比较而言,直壁ω型燃烧室最易制造,热应力较小,挤流作用明显,为最佳燃烧室方案。
            • The effect of swirl strength on particulate emission at medium speed operating condition was not significant because the squish and expansion swirl generated by piston movement could meet the needs of fuel combustion.
              中速工况气缸内形成的挤气涡流和膨胀涡流基本可以满足燃料燃烧的需求,涡流强度在一定范围内的变化对降低柴油机排气微粒贡献不大。