deoxidizing
英
美
网络 脱氧; 去氧
双语例句
- Chemistry dynamics calculation is made on biomass volatilization deoxidizing NO. Experimental results accordant with calculation well. The simulation model is reasonable.
本文还尝试了通过生物质挥发分同相还原NO的化学动力学计算来对生物质燃料的再燃进行模拟，计算结果和试验结果规律是一致的，说明该模型是合理的。 - The results of this study are significant for the use, deactivation and reactivation of Co-Mo/ γ-Al2O3 deoxidizing catalyst.
研究结果对Co-Mo/γ-Al2O3非贵金属耐硫脱氧催化剂的使用、失活和再生有重要的意义。 - Control model of deoxidizing and alloying for steelmaking process
炼钢过程的脱氧合金化控制模型 - Therefore, it is one of the key problems of producing the clean steel to control the deoxidization and deoxidizing products of the liquid steel.
因而，钢水的脱氧和脱氧产物的控制成为生产纯净钢的关键问题之一。 - The preparation of ultrafine WO_3 powders and the deoxidizing and carbonizing of WO_3 to WC were studied. Well abrasive resistant metal composite coating strengthened by ultrafine WC particles was prepared by flame thermal spray method and abrasive wear property was studied.
本文探索了超细WO3粉的制备及其还原碳化为WC粉的方法，采用火焰热喷涂工艺，制备了耐磨性能较好的超细WC陶瓷&金属复合涂层，并研究了涂层的耐磨性能。 - The composition of the secondly and thirdly deoxidizing products can be controlled through controlling the content of aluminum and calcium of the strong deoxidizing elements, making them have good distortion ability in hot work.
二次和三次脱氧产物的成分可以通过控制钢液中强脱氧元素铝和钙的含量来控制，使它们具有良好的热加工变形能力。 - Preparation of high-concentration sulfur dioxide from deoxidizing phosphogypsum with compound reducing agent
硫脲作还原剂制备二氧化锰及其电化学性能复合还原剂还原分解磷石膏制取高浓度二氧化硫 - Titanium powders produced by deoxidizing TiO2 directly is the mainstream, if we can empolder a kind of more simple and lower cost method to produce Titanium powders, it will certainly stimulate the development of Titanium production industry.
采用TiO2直接还原法生产钛粉已经成为生产钛粉的主要研究方法，如果能开发出更简单、成本更低的方法必将极大地促进钛粉生产行业的发展。 - On this basis, the effect of the supersaturation degree of deoxidizing elements on the size distribution of deoxidizing products and the relationship between the total oxygen content of extra-low steel and the amount and size of oxide inclusions are discussed.
在此基础上，探讨脱氧元素过饱和度对脱氧产物尺寸分布规律的影响，以及超低氧钢全氧含量与氧化物夹杂数量和尺寸的关系。 - The processes such as slag making, desulfurizing, deoxidizing and controlling cleanness of steel in LF are analyzed and optimized.
分析了LF炉的造渣、脱硫、脱氧、氩气搅拌、钢液纯净度控制等工艺制度。